TRUCKING LUMBER & HARDWARE

At Bohnhoff Lumber Co. we carry a full selection of truck body hardware and body lumber. See our list below and please Contact Us if you have any specific questions.

1-1/8” x 7” – Apitong ship lap
1-5/16” x 7” – Apitong ship lap
7/8” x 7” – Apitong tongue & groove
1” x 6” – Apitong slats S4S
Apitong (rough) 2”x6”, 2”x8”, 2”x12”, 3”x12”, 4”x12”
Apitong (S4S) 1-5/8” x 7-3/8”
Apitong truck runners – 2” x 2-1/2”, 2”x3”
Apitong stakes (flemming) 18”-78”
Stake sleeves (flemming)
Stake pockets (flemming)
Gate locks – side & corner (w/ nuts & bolts)
Carriage bolts 3/8”x1-1/2”, 3/8”x1-3/4”, ¼”x3”
Flor torx screws – ¼”x2”, 5/16”x2”, 5/16”x2-1/2”, 5/16”x3”
Torx drivers (drill bits) #30, #40
Sel. Car oak – 4x4, 4x6, 4x12, 4x14, 6x6

1-1/8” x 7” – Apitong ship lap

1-5/16” x 7” – Apitong ship lap

7/8” x 7” – Apitong tongue & groove

1” x 6” – Apitong slats S4S

Apitong (rough) 2”x6”, 2”x8”, 2”x12”, 3”x12”, 4”x12”

Apitong (S4S) 1-5/8” x 7-3/8”

Apitong truck runners – 2” x 2-1/2”, 2”x3”

Apitong stakes (flemming) 18”-78”

Stake sleeves (flemming)

Stake pockets (flemming)

Gate locks – side & corner (w/ nuts & bolts)

Carriage bolts 3/8”x1-1/2”, 3/8”x1-3/4”, ¼”x3”

Flor torx screws – ¼”x2”, 5/16”x2”, 5/16”x2-1/2”, 5/16”x3”

Torx drivers (drill bits) #30, #40

Sel. Car oak – 4x4, 4x6, 4x12, 4x14, 6x6